Melba Kayak April 25th, 2018 - 13:47:13
Foam Blocks This method is kind of like the duct tape approach to kayak transport. With this system the foam blocks are placed on the roof of the car and the kayak is strapped down sandwiching the foam between the roof and the kayak. The reason foam blocks are so popular is that they are a very economical transport system. However, care needs to be taken to make sure the kayak is secured properly to prevent any problems and or damage to your kayak and/or vehicle. foamblock Car with with foam block carrier system Trailers: This is fast becoming a popular alternative for individuals who are tired of lifting or for the family that needs an easy way to haul the fleet. Many trailers are well made, perfect for kayaks, and in some cases can be close to cost of an aftermarket rack system. We recommend Trailex Trailers.
The sit on top kayak is the more popular fishing kayak as they let you fish from a variety of positions and they have greater storage. SOTs are moulded tubes that you sit on rather than in. Any water that ends up on the kayak drains through holes that run from the top to below the water line. These holes are called scuppers and they eliminate the need to remove the water as the properties of the designs does this. This means however that you will get wet so dress appropriately as you are exposed to the elements. The sit on top allows you to get on and of with greater ease and is easier to regain if you overturn. The sit on top is a great choice if you will be standing, getting off or on, or if you want to be in contact with the water or sit side saddle while fishing. Models such as the Perception Sport Pescador 12 angler kayak are a favorite for their storage, maneuverability and style.
Lets go over some of the different methods to transport your kayak(s). Transport Methods Rack Systems Most kayak transport needs can be satisfied by adding an after-market rack system. A rack system includes the bars and feet (adapters) that attach the system to your particular vehicle. The bars can be used alone or they can serve as the base for additional kayak carriers and accessories. The most widely used systems are made by Thule and Yakima. These types of racks offer the most weight capacity and are the safest way to transport kayaks on a vehicle. Factory Racks Many vehicles come with factory bars (usually the flat oblong shaped ones) and these can work fine to transport your kayak and can usually be fitted with most kayak carriers, but they lack the carrying capacity and long term strength of a good after-market rack system. So if you need to carry multiple kayaks or even one heavy single kayak, investing in a good rack system will be your best option.
Helpers & Load Assist Devices No matter what system you are using you will still have to physically set the kayak into or onto it. This may seem difficult and awkward at first, but you will find that it will get easier with repetition and ultimately you will find what works best for you and your situation. But a little help doesnt hurt. So here is a list of products that can help make bearing the weight a little easier. Thule Hydro Glide: helps when loading your kayak from one end of your vehicle and also acts to hold the kayak during transport. The kayak slides easily on felt covered pads. Thule Roller Coaster: a roller attached to a set of saddles that allows you to push the kayak up onto the roof from the rear of the vehicle. Loading Bars: Thule as well other companies make a bar that extends out so you can lift one end of the kayak on the bar and then lift the other side onto your rack. Thule makes the Outrigger.