Melba Kayak April 27th, 2018 - 08:43:08
Lets go over some of the different methods to transport your kayak(s). Transport Methods Rack Systems Most kayak transport needs can be satisfied by adding an after-market rack system. A rack system includes the bars and feet (adapters) that attach the system to your particular vehicle. The bars can be used alone or they can serve as the base for additional kayak carriers and accessories. The most widely used systems are made by Thule and Yakima. These types of racks offer the most weight capacity and are the safest way to transport kayaks on a vehicle. Factory Racks Many vehicles come with factory bars (usually the flat oblong shaped ones) and these can work fine to transport your kayak and can usually be fitted with most kayak carriers, but they lack the carrying capacity and long term strength of a good after-market rack system. So if you need to carry multiple kayaks or even one heavy single kayak, investing in a good rack system will be your best option.
Dagger Kayaks Dagger is the classic success story: A few paddling buddies worked tirelessly in a small shop with a dirt room floor to create the ultimate in world-class kayaks. Today, Dagger kayaks are a sportsmans favorite; renowned for producing the highest quality kayaks available for the money. Before their products are released to the consumer, Dagger kayaks are rough-handled and tested by a collective group of kayaking pros known as Team Dagger. Buyers of Dagger kayaks can rest assured that their kayak met stringent standards before Team Dagger was willing to give it their stamp of approval. Hobie Kayaks Hobie kayaks originate from a proud heritage of water craft. The company boasts that their mother was a sailboat and their father was a surfboard. Applying this expertise in water craft design, Hobie now creates some of the most innovative, awe-inspiring kayaks available today. Hobies experience and technology redefines the industry standard. For example, their MirageDrive pedaling system allows the kayaker to paddle via two underwater flippers, not unlike a penguins fins. And with their seamless, roto-molded, polethylene construction, Hobie kayaks are closer to guided missiles than the typical old-fashioned kayaks of years past.
5. Brands You will never regret purchasing a kayak from a kayak building company. I have seen tons of generic molded kayaks made in factories over seas, that have a label slapped on them and they are widely sold at low cost outlets all over the country. There are a lot of reasons to avoid these kayaks, but the main reason is that they are not made by people who actually kayak. There are several US based companies that were started by kayaking enthusiasts, and they make great kayaks. I want you to get the best recreational kayak you can, for the cheapest price. It may mean you need to shop around and look for deals. Buying from a kayak making company will mean you get a great recreational kayak that you can use for many years to come.
Pros: J-carriers work well to protect the kayak hull from damage when tightening the straps. They will also maximize your roof space to allow for extra kayaks or other accessories. Cons: It can be tough to maneuver the kayak on top of your vehicle and into the side position of the J-carrier, especially if your vehicle is tall. Also, be careful in parking garages as the added height could be a problem. Some examples of J-carriers are: Thule Hullaport and the Malone Autoloader. Vehicle types Cars Cars with short roofs can be a challenge - especially 2-door cars. The shorter the distance between the straps/bars the less secure the system will be. Always, use bow and stern lines when transporting by car or any vehicle with a short roof span - a favorite of ours is the Thule Quickdraw.